Whirlpool Washer HC Error Code: What It Means & What to Check
Q: What does the Whirlpool washer HC error code mean?
A: On many Whirlpool washers, HC means the hot and cold inlet hoses are reversed.
What This Code Usually Means
Whirlpool says HC appears when the cold hose is connected to the hot inlet and the hot hose is connected to the cold inlet.
What You May Notice
- The code may appear at the end of the cycle
- Water temperatures may seem wrong
- Wash performance may feel inconsistent
Safety First
Turn off the water valves before disconnecting any hoses.
Quick Checks You Can Try
- Make sure hot goes to hot and cold goes to cold.
- Check that the hoses are not crossed behind the washer.
- Restart the washer after correcting the hookups.
Most Common Causes
- Hot and cold hoses reversed
- Incorrect hookup after moving or installing the washer
What Beacon Usually Checks
Our friendly technicians in yellow usually verify hose placement, check actual inlet temperatures, and make sure the setup is correct after installation or a move.
When to Call Beacon
If the hoses are connected correctly and HC still appears, schedule service at /request-service, call (352) 726-7530, or visit www.BeaconSaves.com.
Prevent This Next Time
Double-check hose placement any time the washer is moved or replaced.
Content Update & Editorial Review
This article was reviewed and updated on March 8, 2026 by Chris.
Frequently Asked Questions
Does HC mean a broken washer?
Usually no. It most often means the hot and cold hoses are connected incorrectly.
Can I fix HC myself?
Many homeowners can safely correct the hose connections if the water is turned off first.
Why would HC show at the end of the cycle?
That is when some models report that the water connections appear reversed.
When should I call Beacon for HC?
Call if the hose setup is correct and the code still returns.
📍 Contact Beacon Services & Appliances
📞 (352) 726-7530
🌐 www.BeaconSaves.com.