Dishwasher Error Code Help
Samsung Dishwasher TE Error Code
If your Samsung dishwasher displays TE, it typically points to a temperature sensor (thermistor) error. Sometimes a power reset clears a one-time glitch, but recurring TE usually means the sensor circuit or control needs service.
Quick Answer
Q: What does the Samsung dishwasher TE error code mean?
A: TE commonly indicates a temperature sensor/thermistor error—the dishwasher isn’t getting a normal temperature reading. If TE returns after a reset, likely causes include the thermistor, wiring/connector issues, or the control board.
Common Symptoms
- Dishwasher stops mid-cycle and displays TE
- Cycle ends early or drains out unexpectedly
- Water may not heat correctly (too cool or abnormal heating behavior)
- Error returns in the same portion of the cycle (often during heating)
Safety First
- If you smell electrical burning or see unusual steam, shut off power at the breaker and stop using the dishwasher.
- Let the unit cool before restarting.
- Don’t pull the dishwasher out if you’re not comfortable working around plumbing/electrical—call Beacon instead.
Homeowner Quick Checks
1) Empty and restart on a normal cycle
Remove dishes (especially heavily soiled loads) and run a Normal cycle to see if TE was a one-time control hiccup. Avoid high-temp/sanitize options for the test run.
2) Power reset the dishwasher
Turn the dishwasher off at the breaker (preferred) for 2 minutes, then restore power and try a normal cycle. This can clear a temporary sensor reading glitch.
3) Watch for repeat behavior
If TE returns quickly after a reset, it’s unlikely to be user-caused. That points to a thermistor/sensor circuit issue or a control problem that needs testing.
4) If TE is persistent, stop and schedule service
Temperature sensing faults usually require electrical testing and access to internal components. Continuing to run the dishwasher can lead to unreliable heating and repeated shutdowns.
Most Common Causes and Likely Parts
Temperature sensing circuit
- Thermistor / temperature sensor failing or out of range
- Loose connector or damaged wiring harness
- Moisture/corrosion at a connection point (model-dependent)
Control-side issue
- Control board misreading sensor input
- Intermittent control behavior affecting sensor processing
When to Call Beacon
If TE returns after you’ve tried a normal cycle and a power reset, schedule service. A failed temperature sensor circuit can cause heating problems and repeated shutdowns, and it typically needs hands-on testing to confirm.
Request service Call (352) 726-7530
Our friendly technicians in yellow can test the thermistor, inspect wiring/connectors, and confirm whether the control board is reading temperatures correctly. For service info, visit www.BeaconSaves.com.
Content Update & Editorial Review
Reviewed:
Editorial review by: Chris
FAQ
Is TE a heater problem or a sensor problem?
TE is typically a sensor/thermistor problem—meaning the dishwasher isn’t getting a valid temperature reading.
Can I clear TE by running the dishwasher again?
You can try a normal cycle and a power reset. If TE returns, the underlying sensor circuit issue still needs to be fixed.
Why would TE show up intermittently?
Intermittent TE can happen with a sensor that’s failing, a loose connector, or wiring that loses connection as the unit warms up.
What parts are most commonly involved with TE?
The most common are the thermistor/temperature sensor and its wiring/connector. Less commonly, the control board is at fault.
Is it safe to keep using the dishwasher with a TE code?
If TE keeps returning, it’s best to stop using it and schedule service. Temperature sensing issues can cause unreliable heating and repeated shutdowns.
When should I call Beacon for TE?
If TE returns after a reset and a normal cycle, schedule service so the thermistor circuit and control inputs can be tested safely.