LG Refrigerator DHE Error Code: What It Means & What to Check

If your LG refrigerator is showing DHE, it typically points to a dry function error. On many LG designs, the refrigerator uses a small “dry” system (often involving a heater and airflow) to help manage moisture and reduce condensation in certain areas. When the control board detects that the dry function isn’t operating normally, it may display DHE.

The good news: your first step is usually simple — a proper power reset. If the code returns, it’s time for service so the underlying cause (heater, fan/airflow, sensor, wiring, or control) can be confirmed.

What DHE usually means

DHE = “Dry function error.” This generally means the refrigerator isn’t seeing the expected response from the dry system during operation. The appliance may still cool, but you could also see symptoms like unusual condensation, inconsistent temperatures, or the error appearing after a power event.

Quick checks you can safely do at home

1) Do a full power reset

A reset can clear false codes caused by brief power glitches — which are common during Florida storms or quick outages.

Unplug the refrigerator (or turn it off at the breaker if required).
Wait 5 minutes (this helps the control fully discharge).
Restore power and allow the unit time to stabilize.

If DHE clears and stays gone, it may have been a temporary control hiccup.

2) Confirm doors are sealing properly

Even though DHE is a “dry function” code, moisture intrusion can make related problems worse. Check:

Gaskets for gaps, tears, or sticky residue
That shelves/bins aren’t preventing full closure
That the doors aren’t being held slightly open by items inside

3) Keep vents and airflow paths clear

Airflow matters for moisture control systems. Make sure vent areas inside the refrigerator aren’t blocked by containers or bags.

If DHE repeats after a reset, here’s what that usually indicates

If the error returns quickly — especially within the next day or two — the refrigerator is likely detecting a real fault that needs diagnosis. Common categories include:

Dry heater / dry function system issue (heater not energizing as expected)
Fan or airflow problem tied to the dry system
Thermistor/sensor issue causing incorrect readings
Wiring/connector problem (loose, corroded, or damaged)
Control board problem (less common, but possible)

When to stop troubleshooting and call Beacon

Call for service if:

DHE comes back after a full power reset
You’re seeing heavy condensation or moisture inside the refrigerator
The refrigerator won’t maintain temperature or is behaving inconsistently
You notice unusual smells, buzzing, or electrical symptoms (tripping breaker, burning odor)

At that point, it’s best to have our friendly technicians in yellow test the dry system components, verify sensor readings, and inspect wiring and control outputs safely.

Local Help in Citrus County

If your LG refrigerator is showing DHE and you want a clear diagnosis (without guessing), we’re here to help.

Beacon Services & Appliances
(352) 726-7530 • www.BeaconSaves.com.

Content Update & Editorial Review

Last reviewed: February 13, 2026

Reviewed by: Chris

FAQ: LG Refrigerator DHE Error Code

What does DHE mean on an LG refrigerator?

DHE typically indicates a “dry function error,” meaning the refrigerator isn’t seeing the expected operation from its moisture-management (dry) system.

Will a power reset clear the DHE code?

Sometimes, yes — especially if the code appeared after a brief outage or power flicker. Unplug the fridge for about 5 minutes, then restore power. If the code returns, it likely needs service.

Can humidity or a poor door seal make DHE worse?

It can. Warm, humid air entering the cabinet can increase moisture and push the system harder. Check gaskets, door alignment, and avoid blocking airflow vents.

What parts are most commonly involved with DHE?

Likely parts include components in the dry heater/fan system, a thermistor (sensor), wiring/connectors, and less commonly the main control board.

Should I keep using the refrigerator if DHE is showing?

If cooling seems normal, you can usually keep it running short-term while you arrange service. If temperatures are rising, there’s heavy condensation, or you notice electrical symptoms, stop and call for professional help.

Do you service LG refrigerators in Citrus County?

Yes. If you’re in our service area, call Beacon Services & Appliances to schedule a diagnostic with our friendly technicians in yellow.

📍 Contact Beacon Services & Appliances
📞 (352) 726-7530
🌐 www.BeaconSaves.com.